51 2 345 jst b this, the thinnest, 2.5mm (.098") pitch connector, is 8.1mm (.319") in height after mounting and 3.8mm (.150") in width. it is designed to meet the demand for the high- density connection of internal wires to printed circuit boards. it is compact, highly reliable and low in cost. features CCCCCCCCCCCCCCCCCCCCCCCC ? compact and slim this connector is designed to be compact and unusually thin. it measures only 8.1mm (.319") high after mounting and is just 3.8mm (.150") wide. ? highly reliable contact the contact has long dimples near the center that ensure continuity of low voltage and low current circuits at all times, even under conditions of vibration and abusive prying. ? polarizing guides the header and housing have guides to prevent improper mating. ? whisker prevention the contact material is treated with a reflow process, and the square post is copper-undercoated and tin/lead-plated for whisker prevention. ? easy and effective crimping although the contact is compact, it has a long wire strip length, 2.60.4mm (.102".016"). this long length is very useful for automatic crimping and when crimping shielded wires. specifications CCCCCCCCCCCCCCCCCCC ? current rating:3a ac, dc (awg#22) ? voltage rating:250v ac, dc ? temperature range:-25?c to +85?c (including temperature rise in applying electrical current) ? contact resistance:initial value/10m ? max. after environmental testing/20m ? max. ? insulation resistance:1,000m ? min. ? withstanding voltage:800v ac/minute ? applicable wire:awg #32 to #22 ? applicable pc board thickness:0.8 to 1.6mm(.031" to .063") * contact jst for details. standards CCCCCCCCCCCCCCCCCCCCCC 0 recognized e60389 1 certified lr20812 2 r75089 eh connector disconnectable crimp style connectors 2.5mm (.098") pitch crimp radial tape www..net
52 eh connector contact CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 1.1(.039) 5.7(.224) 2.85(.112) 2.05(.081) 2.0(.079) 1.6(.063) model no. applicable wire mm 2 awg # insulation o.d. mm(in.) q'ty / reel seh-001t-p0.6 seh-003t-p0.6l 0.05 to 0.3 0.032 to 0.08 30 to 22 32 to 28 1.0 to 1.9(.039 to .075) 0.5 to 1.1(.020 to .043) 10,000 material and finish phosphor bronze, tin-plated housing CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 0.7 6.5(.256) 3.8(.150) 0.6 (.024) (.028) a b jst 2 1367 2.25 (.089) 2.5(.098) circuit no.1 model no. q'ty / bag cir- cuits dimensions mm(in.) ab material 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ehr- 2 ehr- 3 ehr- 4 ehr- 5 ehr- 6 ehr- 7 ehr- 8 ehr- 9 ehr-10 ehr-11 ehr-12 ehr-13 ehr-14 ehr-15 2.5( .098) 5.0( .197) 7.5( .295) 10.0( .394) 12.5( .492) 15.0( .591) 17.5( .689) 20.0( .787) 22.5( .866) 25.0( .984) 27.5(1.083) 30.0(1.181) 32.5(1.280) 35.0(1.378) 7.0( .276) 9.5( .374) 12.0( .472) 14.5( .571) 17.0( .669) 19.5( .768) 22.0( .866) 24.5( .965) 27.0(1.063) 29.5(1.161) 32.0(1.260) 34.5(1.358) 37.0(1.457) 39.5(1.555) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 nylon 66, ul94v-0, natural (white) note: 1. contact jst for gold-plated contacts. 2. seh-003t-p0.6l is not tu v approved. as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. ehr-2-o o - (blank)natural (white) kblack rred trtomato red eblue yyellow llemon yellow mgreen oorange nbrown plpurple pkpink hgray lelight blue fyvivid yellow www..net
53 eh connector shrouded header CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC a 3.2(.126) 6.0(.236) b 3.8(.150) 0.64 (.025) 3.3(.130) 2.5(.098) 1.6(.063) circuit no.1 3.2(.126) 5.1(.201) 3.8(.150) b a 6.0(.236) 3.3(.130) 0.64 (.025) 1.6(.063) 2.5 (.098) 2.5 (.098) circuit no.1 a b 5.2(.205) 6.0(.236) 6.7(.264) 4.2(.165) 4.0(.157) 3.2 (.126) 2.2 (.087) 2.5 (.098) 2.5 (.098) 0.64 (.025) circuit no.1 model no. q'ty / box cir- cuits dimensions mm.(in) top entry type side entry type ab top entry type material and finish 2 3 4 5 6 7 8 9 10 11 12 13 14 15 b 2b-eh-a b 3b-eh-a b 4b-eh-a b 5b-eh-a b 6b-eh-a b 7b-eh-a b 8b-eh-a b 9b-eh-a b10b-eh-a b11b-eh-a b12b-eh-a b13b-eh-a b14b-eh-a b15b-eh-a 2.5( .098) 5.0( .197) 7.5( .295) 10.0( .394) 12.5( .492) 15.0( .591) 17.5( .689) 20.0( .787) 22.5( .866) 25.0( .984) 27.5(1.083) 30.0(1.181) 32.5(1.280) 35.0(1.378) 1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 250 250 250 s 2b-eh s 3b-eh s 4b-eh s 5b-eh s 6b-eh s 7b-eh s 8b-eh s 9b-eh s10b-eh s11b-eh s12b-eh s13b-eh s14b-eh s15b-eh 7.5( .295) 10.0( .394) 12.5( .492) 15.0( .591) 17.5( .689) 20.0( .787) 22.5( .886) 25.0( .984) 27.5(1.083) 30.0(1.181) 32.5(1.280) 35.0(1.378) 37.5(1.476) 40.0(1.575) post: brass, copper-undercoated, tin/lead plated wafer: nylon 66, ul94v-0, natural (white) side entry type 1,000 1,000 1,000 1,000 500 500 500 500 500 250 250 250 250 250 the shrouded headers are interchangeable with those of the hr crimp style and insulation displacement connectors. top entry type side entry type (2 circuits) (3 to 15 circuits) note: 1. also available and identified as model bxxb-eh is a top entry type having a post extension length of 4.0mm(.157") 2. top entry type headers are not tu v approved. pc board layout (viewed from soldering side) and assembly layout CCCCCCCCCCCCCCCCCCC wt5at0x5k 8t9at803k at158k "te 0t5 0.05 (.098 .002) 2.5 (.098) min. 0.9 + 0.1 (.035 + .004 )dia. 2.2 (.087) min. 0 0 10.3(.406) 8.2(.323) (.165) 4.2 2.5 0.05 (.098 .002) 1.9 (.074) min. 0.9 + 0.1 (.035 + .004 )dia. 6.7 (.264) min. 0 0 note: 1. tolerances are non-cumulative: 0.05mm(.002" ) for all centers. 2. hole dimension differ according to the kind of pc board and piercing method. if pc boards made of hard material such as fr- 4 are used, the hole dimensions should be larger. the dimensions above should serve as a guideline. contact jst for details. top entry type side entry type as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. B2B-EH-A-oo - (blank)natural (white) kblack rred eblue yyellow mgreen ex. s2b-eh-o o - (blank)natural (white) kblack rred trtomato red eblue yyellow llemon yellow mgreen oorange nbrown ppurple pkpink hgray lelight blue fyvivid yellow www..net
54 eh connector 7.5(.295) 2.2(.087) 5.4(.213) 2.5(.098) 6.5 (.255) 1.5(.059) [1.0(.039)] 4.4 (.173) 0.64(.025) dia. a b 2.8(.110) 2.5(.098) 2.5(.098) 0.64(.025) dia. 6.5(.256) 1.5(.059) [1.0(.039)] 2.2(.087) 5.6(.220) 4.4 (.173) 0.64(.025) dia. ts type (2 circuits) (3 to 8 circuits) a b 2.8(.110) 2.5(.098) 2.5(.098) 0.64(.025) 6.5(.256) 2.2(.087) 5.6(.220) 4.4 (.173) [0.7(.028) dia.] [0.7(.028) dia.] tv4 type shrouded header on radial-tape CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC ?the shrouded headers are interchangeable with those of the hr crimp style and insulation displacement connectors . ? shrouded headers on radial-tape are not tu v approved. model no. q'ty / box cir- cuits dimensions mm(in.) ab material and finish 2 3 4 5 6 7 8 b2b-eh-ts b3b-eh-ts b4b-eh-ts b5b-eh-ts b6b-eh-ts b7b-eh-ts b8b-eh-ts - 5.0(.197) 7.5(.295) 10.0(.394) 12.5(.492) 15.0(.591) 17.5(.689) - 10.0(.394) 12.5(.492) 15.0(.591) 17.5(.689) 20.0(.787) 22.5(.886) 1,400 1,400 700 700 700 700 700 pin: brass, copper-undercoated, tin/lead-plated wafer: nylon 66, ul94v-0, natural (white) model no. q'ty / box cir- cuits dimensions mm(in.) ab material and finish 3 4 5 6 7 8 b3b-eh-tv4 b4b-eh-tv4 b5b-eh-tv4 b6b-eh-tv4 b7b-eh-tv4 b8b-eh-tv4 5.0(.197) 7.5(.295) 10.0(.394) 12.5(.492) 15.0(.591) 17.5(.689) 10.0(.394) 12.5(.492) 15.0(.591) 17.5(.689) 20.0(.787) 22.5(.886) 1,400 700 700 700 700 700 post: brass, copper-undercoated, tin/lead-plated wafer: nylon 66, ul94v-0, natural (white) as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. b2b-eh-ts-oo - (blank)natural (white) kblack rred eblue yyellow mgreen nbrown www..net
55 55 package type distance between folds box size distance between the end of the tape and the first connector s center line (either end) flat pack (zigzag folded) 24 indexing holes per fold (304.8mm/12") (316x45x330mm)12.4"(w)x1.8"(d) x13.0"(h) 19.05mm(.750") packaging specifications CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 8.6(.339) 6.5(.256) (.173) 4.4 2.5 0.05 (.098 .002) 2.5 (.098) min. 0.9 + 0.1 (.035 + .004 )dia. 2.2 (.087) min. 0 0 ter m in als & co nnec to rs r d h w lead tape tail tape distance between the end of the tape and the first connector's center line (either end) eh connector pc board layout (viewed from soldering side) and assembly layout CCCCCCCCCCCCCCCCCCC note: 1. tolerances are non-cumulative: 0.05mm(.002" ) for all centers. 2. hole dimension differ according to the kind of pc board and piercing method. if pc boards made of hard material such as fr- 4 are used, the hole dimensions should be larger. the dimensions above should serve as a guideline. contact jst for details. taping specifications CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 12.7(.500) 20.0(.787) 9.0(.354) 18.0(.709) 2 and 3 circuits: 12.7(.500) 4 to 8 circuits: 25.4(1.000) 6.0 (.236) 4.0 (.157)dia. 2circuits: 5.1(.201) 3 to 8 circuits: 3.85(.152) 2circuits: 2.5(.098) 3 to 8 circuits: 5.0(.197) note: conforms to jis c0825. www..net
56 eh connector contact crimp applicator mks-l(-10) compact crimp applicator mks-ls strip-crimp applicator mks-sc with safety cover without safety cover with safety cover without safety cover with safety cover applicator for the semi-automatic press ap-k2n CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC seh-001t-p0.6 aplmk seh001-06 aplnc seh001-06 aplmkls seh001-06 apllsnc seh001-06 aplsc seh001-06 seh-003t-p0.6l aplmk seh003-06 aplnc seh003-06 C C aplsc seh003-06 www..net
|
